298 South Road, Sheffield, S6 3TE tel: 0114 287 0723 email: sales@eesy.uk.com
Main Website
e: sales@eesy.uk.com
t: 0114 287 0723
  298 South Road
  Sheffield, S6 3TE
 
 
  Energy Efficient Solutions Yorkshire
  Gallery  
Galleries
  Other Services  
  Underfloor Heating
  Get In Touch  
If you like the idea of doing your bit for the environment, whilst enjoying the benefits, then pick up the phone or fill out the form on the contact page.

All our details along with a web form can be found on the contact page click here

Tel: 0114 287 0723

Floor Construction Methods

 
Underfloor Heating - Design & Heating Controls
Underfloor Heating Design

At Efficient Energy Solutions Yorkshire, we will take your idea from concept through to completion. We are happy to help you at every stage of your project.

Your system will be tailor made to your property; we can offer help and advice on products and systems.

As always there are several ways to ‘skin a cat,’ and we will be happy to work with you throughout the process.

Through our relationship with our suppliers and their highly skilled and experienced team of heating engineers we can guarantee you are in safe hands.

We are able to provide you with technical drawings for your project including manifold locations, floor sections and number of loops as an initial design concept.

As the project progresses we can supply full schematics incorporating all the details which will be required to complete your installation.

Our technical team can also advise on incorporating any other renewable energy technologies into your project, such as air source heat pumps, ground source heat pumps and solar thermal.

Underfloor Heating Controls
Controlling your underfloor heating system is important for its effectiveness and efficiency. We provide a range of water and air temperature control products, for your underfloor heating.

Air temperature is controlled via room thermostats and programmers.

Water temperature is controlled via the boiler or heat pump and the information they receive from the weather compensation device.

We can advise you on all the latest technology to help make your property as comfortable as possible, including the provision of zone control to give you the maximum amount of flexibility in your heating system outputs. The beauty about zone controlling is that you can control and set the temperature in each room individually via a programmable stat located within that room. This works well in commercial applications such as a retirement homes; each occupant can set the temperature in their own rooms to suit their individual needs.

We can help you select the right controls to suit your needs, 24v, 230v and also wireless options are available, with a variety of features including temperature optimisation, night set back and holiday functions. Once decided on specification all the relevant info and wiring schematics can be relayed to our team of in house electricians so that they know what cabling to install, and how to connect up. Alternatively a wireless system may be more desirable if retrofitting and causing damage for new cabling runs is not acceptable.

 
Water Temperature and Weather Compensation

 

Due to the low water temperature required by underfloor heating, we recommend controls to manage the temperature of the water entering the manifold. The sophisticated weather compensating controls ensure that the project is as energy efficient as possible.
The weather compensating system takes into account the temperature of the outside air to ensure that the inside of the building is correctly compensated:

In particularly cold spells the flow temp can be increased

In warmer weather flow temperature is decreased

The flow temperature is always matched to the heating requirements of the building at all times therefore the underfloor heating system does not over or under heat as can happen with a fixed water flow temperature system. As with the room temperature control, mechanical schematics are available and are included within every bespoke underfloor heating design that we produce.

Why Chose a Weather Compensated System?

A weather compensated system can offer the following benefits for underfloor heating systems:

Better comfort conditions

Increase in system efficiency

Automatic set back of water temperature

Intelligent system shut down during periods of warm weather

Fuel savings of 14% – compared to thermostats only

Gas boiler flow temperature reset

Equal boiler run time

Oil boiler return water temperature protection

Maximises boiler efficiency

System component exercise during periods of inactivity

Pump over-run feature
How a Weather Compensation System Works
Room Temperature Controls

We offer a wide range of thermostatic room controls, including heating only, two stage heating and heating/cooling for hard wired systems. Our technical team can provide full wiring diagrams for installation to complete with the system you chose as well as offering advice on selecting the best system to meet your needs.

In addition to the traditional wired controls we can offer state of the art wireless systems which uses radio signals to enable communication between the thermostats and the control without the need for hard wiring, giving you flexibility in installation and positioning of the system components.

Zone Controls

Modern technology means that you no longer have to have the same temperature control throughout the whole of the building, your heating system can be created to allow for zone control, so you can have the bedrooms at a cooler temperature than your living room or in commercial applications such as a retirement home, each occupant can set the temperature in their own rooms to suit their individual needs.
 
 


EFFICIENT ENERGY SOLUTIONS YORKSHIRE

© 2013 Efficient Energy Solutions Yorkshire. All Rights Reserved E & O E

 
Luvvin Live Web Solutions

 

Email Us Home